BS EN 10264-1-2002 Steel wire and wire products - Steel wire for ropes - Part 1 General requirements
|
ID： |
32300E083ED14B26AB6F3F6BCD0082B3 |
|
文件大小(MB)： |
0.11 |
|
页数： |
14 |
|
文件格式： |
|
|
日期： |
2009-5-18 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,10264-1:2002,Steel wire and wire,products — Steel wire,for ropes —,Part 1: General requirements,The European Standard EN 10264-1:2002 has the status of a,British Standard,ICS 77.140.65,NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW,BS EN 10264-1:2002,This British Standard, having,been prepared under the,direction of the Engineering,Sector Policy and Strategy,Committee, was published,under the authority of the,Standards Policy and Strategy,Committee on 18 April 2002,. BSI 18 April 2002,ISBN 0 580 39503 0,National foreword,This British Standard is the official English language version of,EN 10264-1:2002. Together with BS EN 10264-2:2001 and BS EN 10264-3 it,supersedes BS 2763:1982, which will be withdrawn when BS EN 10264-3 is,published.,The UK participation in its preparation was entrusted to Technical Committee,ISE/26, Steel wire, which has the responsibility to:,A list of organizations represented on this committee can be obtained on,request to its secretary.,Cross-references,The British Standards which implement international or European,publications referred to in this document may be found in the BSI Standards,Catalogue under the section entitled “International Standards Correspondence,Index”, or by using the “Find” facility of the BSI Standards Electronic,Catalogue.,A British Standard does not purport to include all the necessary provisions of,a contract. Users of British Standards are responsible for their correct,application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,— aid enquirers to understand the text;,— present to the responsible European committee any enquiries on the,interpretation, or proposals for change, and keep the UK interests,informed;,— monitor related international and European developments and,promulgate them in the UK.,Summary of pages,This document comprises a front cover, an inside front cover, the EN title page,pages 2 to 10, an inside back cover and a back cover.,The BSI copyright date displayed in this document indicates when the,document was last issued.,Amendments issued since publication,Amd. No. Date Comments,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 10264-1,March 2002,ICS 77.140.65,English version,Steel wire and wire products - Steel wire for ropes - Part 1:,General requirements,Fils et produits tréfilés en acier - Fils pour cables - Partie 1:,Prescriptions générales,Stahldraht und Drahterzeugnisse - Stahldraht für Seile -,Teil 1: Allgemeine Anforderungen,This European Standard was approved by CEN on 20 January 2002.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Management Centre or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official,versions.,CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Management Centre: rue de Stassart, 36 B-1050 Brussels,. 2002 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members.,Ref. No. EN 10264-1:2002 E,EN 10264-1:2002 (E),2,Contents,page,Foreword3,1 Scope .4,2 Normative references ..4,3 Terms and definitions..4,4 Information to be supplied by the client5,5 Characteristics of and requirements for wire 5,5.1 Diameter tolerances..5,5.2 Tensile strength ..5,5.2.1 Tensile strength grade - permitted variations5,5.2.2 Procedure for tensile test..6,5.3 Reverse bend test ..6,5.4 Torsion test.6,5.5 Tensile test on knotted wire..6,5.6 Coatings6,6 Inspection documents.6,6.1 General..6,6.2 Certificate of compliance with order “2.1’6,6.3 Specific inspection certificate “3.1.b” 6,6.4 Specific inspection certificate “3.1 .c” ..7,6.5 Acceptance report “3.2”.7,7 Sampling and compliance criteria.7,8 Marking .7,9 Protection against corrosion and type of packaging8,Annex A (informative) Definition of terms relating to sampling and acceptance.9,A.1 Batch ..9,A.2 Unit, produc……
……